Surfboard wall mount photo line

From the waves to the wall, MOUNTiT suspends the surfboard to the wall. Saves space and solves that tricky storage problem while showing the surfboard off at the same time. New Zealand designed and made, MOUNTiT keeps surfboards in tip-top condition until the next surf
Click Here To Buy Your MOUNTiT Wall Mount

surf board hook

To hook and hold a surfboard to the wall as a display and be storage at the same time

Surfboard wall mount, displays any board in multiple ways stores up off the ground, easy to use & install with only two screws.

Transforms any surfboard into a 3d knockout wall feature, Harnessing the Hydrodynamics and the Artwork. Making the surfboard into a seriously cool 3d piece of equipment to have on the wall with multiple display options

Simply to uses, Insert the board into the centre point of padded arm, adjust angle of the board and lower. When the board is engaged with the padded arms and board holes in the places desired.

Surfboard Wall Mount The Way To

MOUNTiT. Where do you keep your Surfboard, Under the bed, against the wall or just in the way somewhere? We have the Solution!

Transform your board into a knockout wall feature, showcase the hydrodynamics & artwork of your board turning it into a seriously cool 3D piece of equipment to have on your wall.

  • Easy to install, just two screws making a strong hold.
  • Multiple angle display options.
  • Protects your board from damage.
  • Mounts any surfboard to any wall up to 10 kg
  • A great gift for the keen surfer.
  • Free International Shipping
  • Quality Functional And Pro Mount
  • MOUNTiT RiGHT

Click here to see our latest offer on The Mountit Surfboard Wall Mount..

  •  Unparalled storage solution for surfboards
  •  Transforms your board into a wall feature
  •  One of a kind and purpose built
  •  Easy to install and use

 

Fitting a surfboard into your MOUNTiT is simple. Insert the board into the centre point of padded arm, adjust the angle of the board and lower the board’s weight. When the board is lowered and engaged with the padded arms, you will be able to display or store your board securely at the angle desired.

The lightweight and fresh design aesthetic makes MOUNTiT ideal for the home, garage, beach house or apartment. Made from engineered cold-bent steel with rubber tubing grip, MOUNTiT is purpose built to be durable, secure, and easy to install on any desired wall.

You won’t find anything else that parallels MOUNTiT for its sleek design, effective storage and multiple display options for displaying your board.

MOUNTiT Features:

  • Mounts surfboards to any wall.
  • Protects boards from damage.
  • Easy to install (two screws only).
  • Suitable for all surfboards up to 10kg.
  • Turns surfboard into a design feature.
  • Multiple display options.
  • Maximises storage space.
  • Specifications:
  • MOUNTiT is designed to hold Shortboards, Mini-Malibus and Longboards.
  • The maximum load for a surfboard in the MOUNTiT is 10kg.
  • MOUNTiT can be installed on any wall.

 

Each product includes:          1x MOUNTiT

2x screws

2x plastic raw plugs.

Installation:

Locate the middle of a timber stud when fastening MOUNTiT to a standard plasterboard wall. Use a concrete or masonry drill bit if securing to a concrete or brick surface.

Use the picture guide on the back packaging to explain heights.

To be used as a guide only-will depend on the individual height of ceilings.

  1. Select a desired location. Allow space on either side of MOUNTiT to allow operation and angling of the board.
  2. Select the height of the bracket in relation to the length of your board. (See diagram).
  3. Mark the top hole for the bracket.
  4. Drill top hole using a 6mm drill bit, 40mm deep and insert plastic raw plug.
  5. Temporarily screw MOUNTiT to the wall using the top hole.
  6. Place a level on top of the bracket and adjust until it is level. Mark the bottom hole point with a pencil.
  7. Unscrew MOUNTiT from the wall.
  8. Repeat step 3 for bottom hole.
  9. Line the bracket up to the holes and screw MOUNTiT on tightly.
  10. MOUNTiT is ready to mount your board!

Operating MOUNTiT:

  1. Lift the surfboard up and place in between MOUNTiT’s padded arms.
  2. Adjust surfboard to achieve the desired display angle.
  3. To engage: push the surfboard onto the back pad and lower the board down until the front arm holds it in place.
  4. To increase the hold, gently push the surfboard down.
  5. Ensure the largest surface area of the arm pads is in contact with the surfboard.

Secure Option:

With the surfboard in place and pressure applied, reach behind and locate the securing knob on the bracket. Tighten the knob to secure MOUNTiT’s hold on the board.

Use of this securing knob is optional: it acts as a tamper-proof device to keep the board safe.

Removing The Board:

Loosen the securing knob before removing the board. Put both hands on the board, lift up and slide out.

WARNING: Do not alter MOUNTiT from its existing shape.

NOTE: Keep MOUNTiT’s padded arms and the side of board contacting padded arms free of wax at all times.

DISCLAIMER:

Do not use MOUNTiT for anything other than intended use.

MOUNTiT LTD assumes no responsibility for any damage, personal or otherwise, caused by MOUNTiT.